Mindray BeneHeart C Series, Operator'S Manual

Page: 12 / 78

1 - 2
•
Medical electrical equipment which does not incorporate defibrillator protection should be
disconnected during defibrillation.
•
Do not defibrillate a patient who lies on wet ground.
•
For the treatment of patients with implantable pacemakers, place the electrode pads away from
internal pacemaker generator if possible to help prevent damage to the pacemaker.
•
To avoid inadvertent disconnection, route all cables in a way to prevent a stumbling hazard. Wrap
and secure excess cabling to reduce risk of entanglement or strangulation by patients or personnel.
•
Do not touch device connectors or other live equipment if in contact with the patient; otherwise
patient injury may result.
•
Do not touch the patient and live parts simultaneously. Otherwise patient injury may result.
•
Package material may contaminate the environment. Properly dispose of the package material
according to applicable waste control regulations and keep it out of children’s reach.
•
Keep a distance of at least 20cm away from the equipment when the wireless function is in use.
1.1.3 Cautions
CAUTION
•
At the end of its service life, the equipment, as well as its accessories, must be disposed of in
compliance with the guidelines regulating the disposal of such products to avoid contaminating the
environment.
•
Magnetic and electrical fields are capable of interfering with the proper performance of the
equipment. For this reason make sure that all external devices operated in the vicinity of the
equipment comply with the relevant EMC requirements. Mobile phones, X-ray equipment or MRI
devices are a possible source of interference as they may emit higher levels of electromagnetic
radiation.
•
Always install or carry the equipment properly to avoid damage caused by drop, impact, strong
vibration or other mechanical force.
•
Dry the equipment immediately in case of rain.
1.1.4 Notes
NOTE
•
Put the equipment in a location where you can easily view and operate the equipment.
•
During normal use, the operator shall stand in a location where the equipment can be easily viewed
and operated.
•
If the equipment has been dropped or mishandled, perform a user test. If any item fails, contact the
authorized service personnel.