Mindray BeneHeart C Series, Operator'S Manual

Page: 20 / 78

3 - 2
3.2.2 Environmental Requirements
The operating environment of the equipment must meet the requirements specified in this manual.
The environment where the equipment is used shall be reasonably free from noises, vibration, dust, corrosive,
flammable and explosive substances. If the equipment is installed in a cabinet, sufficient space in front and
behind shall be left for convenient operation, maintenance and repair. Moreover, to maintain good ventilation,
the equipment shall be at least 2 inches (5 cm) away from the sides of the cabinet.
When the equipment is moved from one place to another, condensation may occur as a result of temperature or
humidity difference. In this case, never start the system before the condensation disappears.
3.2.3 Connecting the Electrode Pads
1. Open the socket cover , and plug the pads connector into the pads socket.
2. Put the socket cover back. Ensure the socket cover is centered and closed.
3. Place the pads package into the pads package holders properly and carefully. Ensure the expiration date of
pads can be viewed from the pad expiration window.
4. Route the pads cable in the pad package holders.
WARNING
•
Keep the pads cable connected to the equipment at all times.
•
Do not open sealed pads until immediately prior to use.
•
Do not bend the electrode pads forcefully.
•
Make sure the pads package is intact before use. Otherwise, replace it with a new one.