44
Application Notes
RUN/JOG switch
Using a RUN/JOG switch is recommended in applications where
quick stopping is not needed and frequent jogging is required. Use
a single pole, two position switch for the RUN/JOG switch, and a
single pole, normally closed, momentary operated pushbutton for
the JOG pushbutton.
RUN/JOG option #1
In the first wiring option (see Figure 17), connect the RUN/JOG
switch and JOG pushbutton to the inhibit plug as shown below. The
motor coasts to a stop when the RUN/JOG switch is set to JOG.
Press the JOG pushbutton to jog the motor. Return the RUN/JOG
switch to RUN for normal operation.
Figure 17. RUN/JOG Switch (first wiring option)
JOG
RUN
JOG
PUSHBUTTON
INHIBIT
Summary of Contents for XL1100A
Page 69: ...63 NOTES...
Page 70: ...64 NOTES...
