Minarik XL1100A, User Manual

Page: 28 / 72

22 Installation
Two voltage switches (SW501 and SW502) must be set to either
115 or 230 to match the AC line voltage being used. See Figure 7
for the location of the voltage switches.
115 230
C503
C505
T501
SW501
CUR
C501
MAX SPD
IC503
IC501 IC502
FU
5
FAST
-A
C
FUSE
O
SW502
230 115
VOLTAGE
SWITCHES
(SW501 & SW502)
Figure 7. Voltage Switches
Voltage switches
Warning
Change switch settings only when the drive is disconnected
from AC line voltage. Make sure both switches are set to
their correct positions. If the switches are improperly set to a
lower voltage position, the motor will not run at full voltage. If
the switches are improperly set to a higher voltage position,
the motor will overspeed, which may cause motor damage.
NOTE : Model XL1100A does not include these switches.