DECELERATION (DECEL)
The DECEL setting determines the time the motor takes to ramp to
a lower speed. See
Specifications
on page 1 for approximate
deceleration times. DECEL is factory set for the fastest
deceleration time (full CCW).
To set the deceleration time:
1. Set the speed adjust potentiometer full CW. The motor
should run at maximum speed.
2. Turn the speed adjust potentiometer full CCW and measure
the time it takes the motor to go from maximum to minimum
speed.
3. If the time measured in step 2 is not the desired deceleration
time, turn the DECEL trimpot CW for a slower deceleration
time, or CCW for a faster deceleration time. Repeat steps 1
through 3 until the deceleration time is correct.
39
Calibration
Summary of Contents for XL1100A
Page 69: ...63 NOTES...
Page 70: ...64 NOTES...
