11
Installation
Wiring
Warning
Do not install, remove, or rewire this equipment with
power applied.
Failure to heed this warning may result in
fire, explosion, or serious injury.
Circuit potentials are at 115 or 230 VAC above ground. To
prevent the risk of injury or fatality, avoid direct contact with
the printed circuit board or with circuit elements.
Do not disconnect any of the motor leads from the drive
unless power is removed or the drive is disabled. Opening
any one motor lead may destroy the drive.
Use 12 AWG wire for AC line voltage (L1 and L2) and motor
armature (A1 and A2) wiring. Use 18 AWG wire for logic ( S1, S2,
and S3) and motor field (F1 and F2) wiring.
Summary of Contents for XL1100A
Page 69: ...63 NOTES...
Page 70: ...64 NOTES...
