Minarik NRG-2Q Series, User Manual

Page: 20 / 60

14 Installation
Inhibit personality header
The inhibit personality header (SO503) determines how the drive
responds when the INHIBIT terminals (SO501) are shorted
together. Set the inhibit personality before shorting the inhibit
terminal to each other. Jumper pins 1 and 2 for a dynamic brake
response, or pins 2 and 3 for a disable output response (coast to a
stop). (Also read Inhibit terminals section on page 22). See
Figure 4 for jumper and inhibit terminal locations.
+12 VDC terminals
To supply power to external devices, the +12VDC terminals can
supply an unreg12 VDC (30 mA) signal. – is the signal
common terminal, and + is the voltage signal terminal. See Figure
4 for terminal location.
250-0246r2_readers.qxd 6/7/01 10:51 AM Page 14