MIMAKI TS500-1800, Operation Manual

Page: 68 / 184

2-38
Printing Data
Cutting a media
When you cut the media after printing of roll media has been completed, cut it with the key on the operation
panel.
1
Press the key twice.
2
Press the key.
3
Press to specify the cutting position.
4
Press the key.
• The media is cut.
• When the cutting has been completed, the current mode returns to LOCAL.
• When a media is cut, be careful that the printed side does not touch the floor or the printed side of
other already cut media.
• When using the take-up device, take up a cut medium using the switch of the take-up device.
• Before performing cut, fix the tension bars on the front and the rear surfaces of the machine at the
locking position.
• During the origin setting with the jog keys, you can also perform media cutting by pressing the
key. ( P.2-25)
MED I A CUT
[ ENT ]
MED I A CUT
CUT POS I T I ON
[

]
CUT POS I T I ON
0 . 0 - - - -
* * CUT T I NG * *
P L EASE WA I T