MIMAKI TS500-1800 Operation Manual Download Page 132

Page: 132 / 184

4-26

Replacing the Cutter Blade

The cutter blade is consumable.When the cutter blade gets dull, replace it with a new one (SPA-0192).

Press the

key in LOCAL.

Press the

key.

Press

to select [STATION MAINT.].

Press the

key.

• The carriage moves onto the platen.

Open the front cover.

Remove the maintenance cover at the front of the
carriage.

• Remove the screws of both edges of the maintenance

cover, and remove the maintenance cover.

• The blade is sharp.Be careful not to hurt yourself or anyone else.
• Store the cutter blade in a place that is out of the reach of children.In addition, dispose of used cutter

blades according to regional laws and regulations.

• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter blade.

This will help pick up the cutter blade if it drops.

CARR I AGE OUT

[ ENT ]

MAINT.

MOVE POS I T I ON

: S T A T I ON MA I NT .

MOVE POS I T I ON

: S T A T I ON MA I NT .

Front cover

Maintenance cover

Screw

Summary of Contents for TS500-1800

























































































































































































Search results

Summary of Contents for TS500-1800

Reviews:

Related manuals for TS500-1800

Brands by name

Popular brands

MIMAKI TS500-1800, Operation Manual

Search results

Summary of Contents for TS500-1800

Reviews:

Related manuals for TS500-1800

Brands by name

Popular brands