MIMAKI TS500-1800, Operation Manual

Page: 18 / 184

1-6
Operation Panel
Use the operation panel to make settings for printing or operate this machine.
JOG key
Use these keys to shift the carriage or
the media in [LOCAL]. Also use them
to select an item of printing conditions.
key
Use this key to display function setting menu.
key
Cancels the last input value or returns the setting
menu to the immediate higher level of the hierarchy.
Display
Displays the status of the machine,
set items and errors.
ACTIVE lamp
When the power supply is turned on, it
lights.
key
Use this key to switch between [REMOTE] and [LOCAL].
key
Registers the last input value as the setting value or goes
to the immediate lower level of the hierarchy.
key
Use this when setting media cut and the head gap.
key
Draws test patterns to check if there are any
drawing failures such as ink clogging.
Or executes Head cleaning at ink clogging.
key
Use this key to set the temperatures of the Print-
heater and Post-heater

or check the current
temperature of the platen.
key
Performs the adjusting function such as
“Drop.POScorrect” and “Feed COMP.”
key
Performs the maintenance function such as
station maintenance.
key
Deletes the data that have been received.
MAINT.
CONSTANT lamp
Lights in green when the heater temperature reaches the set
temperature.
HEAT lamp
Lights in orange during heating up of the heater.
power button
*1
Turns on/off the power to the machine.
*1 : When the power supply button is turned ON, it lights in green, and when it is OFF, it goes out. The ink clogging
prevention function is periodically operated even when the power button is OFF if the main power switch
keeps being ON. (Auto maintenance function)
P.1-5