2-11
2
2
2
2
11
Insert the roll media in this machine.
• Insert the media from the end first so that there is
little catching and the media can be inserted
smoothly.
(1)
Pull the media out of the roll to the head of
the platen.
(2)
Insert the media between the platen and the
pinch roller.
• Pull the media out of the roll so that the
media can be grasped from the front of the
machine.
(3)
Push down the clamp lever from the back of
this machine.
• The media is held.
12
Close the rear cover.
13
Pull out the roll media out.
(1)
Raise the clamp lever from the front of this
machine.
(2)
Pull out the roll media gently.
14
Push down the clamp lever from the front
of this machine.
15
Hold the media with the media press
gently.
• Set the media so that no media sticks out from the
right end pinch roller to the right side.
• When using a thick media, remove the media
press from the media before printing.
16
Prepare for the take-up device.
(1)
Set the taking-up direction switch to “OFF”
(Center)
(2)
Set the taking-up manual switch to “Auto”
(Lower)
17
Raise the tension bar on the front side to
the highest position, and lock the bar.
18
Feed the media to the tension bar.
(1)
Pressing the [
] key, feed the media until the
tension bar at the rolling side is being hidden.
• Check the media end is not caught into the
slot on the platen, and feed the media.
Media Press
Taking-up manual
switch
Forward
Taking-up with the print side
facing to the outside.
OFF
Not operated.
Manual
Auto
Taking-up direction switch
Backward
Taking-up with the print side
facing to the inside.
Tension bar
Lock
