MIMAKI SWJ-320EA Operation Manual Download

Page: 69 / 116

3-21

About Information MENU

The information of this machine can be confirmed.
The following items can be confirmed as machine information.

Information MENU table

Item

Description

USAGE

WIPING

This displays how many wipings have been done.

PRINT Length

This displays the total length of the printing done to date.

PRINT AREA

This displays the total area of the printing done to date.

USE TIME

This displays the total time for which the machine has been used to date.

VERSION

This displays the version information of this machine.

Ink REPL. Report

This prints ink history of this machine.

List

This allows you to print the settings of this machine.

ERROR HISTORY

This displays the history of errors and warnings to date.
When you press [



][



], the date of occurrence (year/month/day/hour/minute) and the error/

warning information are displayed alternately in the order of occurrence.

4 times

Setup

>
>

Maintenance

Machine Setup

Information

Usage

>
>

Version

List
Ink Repl.Report

>
>

Errot History

Information

Usage

>
>

Version

List
Ink Repl.Report

>
>

Errot History

Information

Usage

>
>

Version

List
Ink Repl.Report

>
>

Errot History

Information

Usage

>
>

Version

List
Ink Repl.Report

>
>

Errot History

Information

Usage

>
>

Version

Ink Repl.Report
List

>
>

Errot History

Information

Usage

>
>

Version

Ink Repl.Report
List

>
>

Errot History

Information

Usage

>
>

Version

Ink Repl.Report
List

>
>

Errot History

Information

Usage

>
>

Version

Ink Repl.Report
List

>
>

Errot History

Information

Usage

>
>

Version

Ink Repl.Report
List

>
>

Errot History

Information

Usage

>
>

Version

Ink Repl.Report
List

>
>

Errot History

REMOTE

MENU

TEST PRINT /

CLEANING

3200mm

Local <Setup 1>

REMOTE

MENU

TEST PRINT /

CLEANING

3200mm

Local <Setup 1>

PRE

PRINT

POST

PRE

PRINT

POST

: Press this to select Information MENU, or to switch to the

previous screen.

: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..

Summary of Contents for SWJ-320EA





















































































































Search results

Summary of Contents for SWJ-320EA

Reviews:

Related manuals for SWJ-320EA

Brands by name

Popular brands

MIMAKI SWJ-320EA, Operation Manual

Search results

Summary of Contents for SWJ-320EA

Reviews:

Related manuals for SWJ-320EA

Brands by name

Popular brands