MIMAKI JV3-130SPII, Operation Manual

Page: 63 / 150

- 2.29 -
Cut off the media by hand [MEDIA CUT]
Cutting off the media at the end of the plotting operation is explained below.
• Do not turn off the main power switch on the rear face. If the main power
switch is turned off, the nozzle will be clogged.
• When Auto cut function has been on, cutt off each datum automatically.
( page 4.8)
STEPS:
1. Make sure that the menu is the LOCAL mode.
Press the [REMOTE] key and put the device back into the
LOCAL mode.
2. Press the Jog key.
Any of the JOG keys can be used.
3. Press the [FUNCTION] key.
4. Press the [ENTER] key.
Cut off the media that has been plotted on.
The menu returns to the LOCAL mode.
The device returns to its initial condition.
< LOCAL >
width: 1272 mm
ORIGIN SET UP
0. 0
- - - - - -
MEDIA CUT
< ENT >
MEDIA CUTTING
PLEASE WAIT
< LOCAL >
width : 1272 mm