MIMAKI JV3-130SPII, Operation Manual

Page: 124 / 150

- 5.32 -
9. When the display shown at right appears,
remove the cleaning cartridge.
Cleaning fluid is suctioned up.
When one step have been completed, the
display shown on the right appears.
If you want to wash the head again, press the
[ ] key to go to the step 6.
If you want to end the washing procedures,
press the [ ] key to go to the step 10.
• When change from SS2 white ink to the other
color ink, operate [HEAD WASH] two or more
times.
10. When all steps have been completed, the
display is shown on the right.
11. Press the [END] key twice, and return the menu
to the FILL UP INK mode.
12. Select ink type to be switched.
Ink is filled automatically when the ink cartridge is set.
• Ink type and ink set can be filled is different
depending on the washed head.
Washed head Ink type and ink set can be filled
1,2,3,4 All ink type/ink set
1,2 Same ink type/ink set as before washing.
3,4 Same ink type as before washig but ink set is as follows:
Ink Type : SS1(Sol), ES3 (ES3 Sol), TS (TS Sol) ,
Eco-HS1(EcoHS1) --> Same Ink set
Ink Type : MS2(MSol), SS2(SS2 Sol)
4-Color ink set --> 4-Color ink set
6 or 8Color ink set --> 6 or 8 Color ink set
INK Type
Sol - 4 color
WASH
REMOVE TOOL
MAINTENANCE
HEAD WASH
< ent >
INK Type
Sol - 4 color
TWICE
HEAD WASH
E N D < > W A S H