MIMAKI JV3-130SPII, Operation Manual

Page: 135 / 150

- 6.7 -
< LOCAL >
DO TEST DRAW
NON-ORIGINAL INK
KKMMCCYY
The nozzle recovery cannot
be expected because the
device is left for a prolonged
period of time.
The loaded ink cartridge is
not MIMAKI genuine.
Make test plotting. If nozzle
missing is serious, execute
[STATION] - [WASH] for mainte-
nance.
Use the ink specified by
MIMAKI.
Warning message Cause Corrective measure
WRONG INK IC
KKMMCCYY
The IC chip of the ink car-
tridge cannot be read nor-
mally.
The type of the loaded ink
cartridge is different from the
previous one.
The color of the loaded ink
cartridge is different from the
previous one.
The loaded ink cartridge is
defective.
The ink cartridge is not
attached to the ink station.
Attach the ink cartridge(s)
corresponding with the color
shown on the display. If the
same error message appears
again on the LCD, contact your
local distributor to call for
service.
Check the type of the loaded
ink cartridge.
Check the color of the loaded
ink cartridge.
Check the loaded ink cartridge.
KIND OF INK
KKMMCCYY
INK COLOR
KKMMCCYY
WRONG CARTRIDGE
KKMMCCYY
NO CARTRIDGE
KKMMCCYY
Not Use 440 cc
KKMMCCYY
L o w e r t h a n p r i n t
g u a r a n t e e T E M P .
H i g h e r t h a n P r i n t
g u a r a n t e e T E M P .
Attach the ink cartridge(s)
corresponding with the color
shown on the display.
440cc cartridge cannot be
used.
(Indicated only the case of
JV3-75SPII.)
Fix the protection cover.
Protection cover is available at
our nearest dealer. After fixing
the protection cover on JV3-
75SPII, carry out the setting of
[USE 440cc]. page 5.33
The plotter is going to plot at
temperature which is out
of guarantee.
Change the temperature of the
installing environment.
When plotting without change,
pless the [ENTER] key.