MIMAKI DM2-1810, Operation Manual

Page: 71 / 146

- 3.19 -
When not in use the machine over the long term [Storage Wash]
17. Clean the wiper and press the [ENTER] key.
18. Clean the wiper guide shaft using a cotton
swab of cloth.
If dirt is hard to remove, use a cotton swab of cloth damp-
ened with water.
• Extremely dirty wiper guide shaft may cause
operational failure of the wiper, resulting in error
display.
20. Fill the cap with the cleaning liquid (A29) using
a syringe.
Dry suction starts in cycles consisting of 10 seconds of
suction followed by 10 seconds of pause.
Repeat the performance of the air aspiration several times to
clean up the ink discharge way.
Perform the operation for the each cap.
21. Close the station cover, and press the [ENTER]
key.
Carriage returns the station to the initial operation performed.
22. Return to the LOCAL mode.
Wiper Cleaning
Completed
: ent
Storage Wash
Completed
: ent
Initialize
Please Wait
<< LOCAL >>
X =1010 Y = 1860