MIMAKI DM2-1810, Operation Manual

Page: 45 / 146

- 2.15 -
Correcting the work feed rate
When the work type is changed, the amount of work feed changes.
If the correction value is not appropriate, stripes may occur in the plotting, disturbing neat plotting.
Correction for the work feed rate in online is available. ( page 2.17)
CORRECTING PATTERN
Plot two bands.
Adjust the plot density so that the boundary of the two bands is plotted with an even density,
Setting value : -100 – 100
Correction value is too large
Correction value is too small
Output direction
Get between lines
Overlap
Second band First band