MIMAKI DM2-1810, Operation Manual

Page: 58 / 146

- 3.6 -
7. Clean the wiper guide shaft using a cotton
swab of cloth.
If dirt is hard to remove, use a cotton swab of cloth damp-
ened with water.
• Extremely dirty wiper guide shaft may cause
operational failure of the wiper, resulting in error
display.
8. Wipe off ink or dirt adhered to the rubber of the
cap and the ceiling of the wiper cover using
cotton swab.
• Clean the area at the end of the day’s operation.
9. Close the station cover, then press the [EN-
TER] key.
Execute the initial operation.
10. Return to the LOCAL mode.
Initialize
Please Wait
<< LOCAL >>
X =1010 Y = 1860
Carriage Out
Completed
: ent