MIMAKI 3042 MkII EX Operation Manual Download Page 86

Page: 86 / 126

Chapter 4 Maintenance

4-10

Nozzle Wash (When PR-200 ink
using)

Press the

(MENU)

in LOCAL mode.

Press

to select “MAINTENANCE”,

and press the

key.

• MAINTENANCE MENU will be displayed.

Press the

key.

• “STATION” will be selected.

Press

, and press the

key.

• “NOZZLE WASH” will be selected and the

carriage will move.

Open the maintenance cover on the station
side.

(When using rubber wiper) Clean the wiper
and bracket.

• Perform Step 7 when using the suction wiper.

(1)

Open the right maintenance cover then pull out it
by holding protrusions at both ends of the wiper.

(2)

Include F-200 / LF-200 maintenance liquid
in the clean stick and clean.

• Wipe off F-200 / LF-200 maintenance liquid

so that no maintenance liquid remains.

(3)

Insert it in the original position by holding the
protrusions at both ends of the wiper.

(When using suction wiper) Clean the
suction wiper and around the wiper.

• Include F-200 / LF-200 in the clean stick and

clean.

• Wipe off F-200 / LF-200 maintenance liquid so

that no maintenance liquid remains.

• On models equipped with the PR-200, ink may

clog the nozzle. Please check the Ver. on the label
of the PR-200 ink cartridge, pack, or bottle, and
clean the nozzle. Please clean the nozzle twice a
week for Ver.2 and once a month for Ver.3.

[Label Ver. notation position]

• 220ml Cartridge

• 250ml Bottle

• 600ml Pack

• 1L Bottle

Maintenance liquid required

• F-200 / LF-200 maintenance liquid (SPC-0568)

• PR-200 cleaning solution

(C-ML013-Z-B2-1-KW)

Protrusion

Suction wipe

Area around wiper

Suction wipe

UJF-3042MkII/3042MkII EX

/6042MkII

UJF-3042MkII e/3042MkII EX e

/6042MkII e

Summary of Contents for 3042 MkII EX































































































































Search results

Summary of Contents for 3042 MkII EX

Reviews:

Related manuals for 3042 MkII EX

Brands by name

Popular brands

MIMAKI 3042 MkII EX, Operation Manual

Search results

Summary of Contents for 3042 MkII EX

Reviews:

Related manuals for 3042 MkII EX

Brands by name

Popular brands