3-28
Chapter 3 Setup
Setting the Printing Check
Select "ON" when you want to conduct nozzle check at
the start of online printing.
1
Press the
(MENU) key in the local
mode.
2
Press
to select "Nozzle Check",
then press the
key
• The nozzle Check menu is displayed.
3
Press
to select “Printing Check”,
and then press the
key.
4
Press
to
select
"ON", and then
press the
key.
• The “Check Interval” setting screen will be
displayed.
• “Select OFF to not set nozzle check. Proceed to
Step 12.
5
Press the
key.
6
Press
to select setting item, and
then press the
key.
Job
:
A nozzle check is conducted at the set
number of printing jobs.
7
Press
to select setting value, and
then press the
key.
SET UP
: 0 to 100 Job
8
Press the
key.
• The “Action” setting screen will be displayed.
9
Press the
key.
• “CLEANING” will be selected.
10
Press
to select cleaning type,
and then press the
key.
Setting value
: SOFT/ NORMAL/ HARD
11
Press
to select retry count, and
then press the
key.
Setting value
: 0 to 3
12
Press the
key several times to
end the setting.
Setting the NOZZLE RECOVERY
set this if you want to conduct automatic nozzle recovery
when nozzle missing is detected.
1
Press the
(MENU) key in the local
mode.
2
Press
to select "Nozzle Check",
then press the
key
• The nozzle Check menu is displayed.
3
Press
to select “NOZZLE
RECOVERY”, and then press the
key.
4
Press
to select ON/OFF, and then
press the
key.
5
Press the
key several times to
end the setting.
The number of nozzles registered for automatic
nozzle recovery can be checked with the
guidance.
Setting the Judgment Condition
Set the conditions for judging nozzle missing.
1
Press the
(MENU) key in the local
mode.
2
Press
to select "Nozzle Check",
then press the
key
• The nozzle Check menu is displayed.
3
Press
to select “Judgement
Condition”, and then press the
key.
4
Press
to select color, and then
press the
key.
5
Press
to set the number of
nozzles for judgment, and then press the
key.
6
Press the
key several times to
end the setting.
• The type of color changes depending on
the ink set.
Summary of Contents for 3042 MkII EX
