Milwaukee M18 HCC75, User Manual

Page: 9 / 38

7
English 7
■ Lay the cable cutter on the cable, with its cutting
edge at right angle, up to the inner cutting end.
■ Cut clean material to extend the blade life. Wipe
dirt and debris from material and blades before
beginning the cut.
MAINTENANCE
Remove the battery pack before starting any work on
the appliance.
Never open the cable cutter, removable battery or
charger.
Check the cable cutter for any problems such as noise
or jamming of moving parts that could be affecting the
tool.
Check the cutting tools for cracks and other signs of
wear.
On completion of the work, clean and grease the
cutting tools.
Check that the cutting edges are sharp and replace
worn cutting jaws.
Changing the blades
Replace the blades when they become chipped or
damaged. Always replace blades as a set. Use only
MILWAUKEE blades.
1. Push the trigger to close the blades slightly. The
retaining rings must be exposed.
2. Remove the battery pack and pull the slide switch
in position lock.
3. Change the blades.
10. 11 Nm
9. 1 Nm
a. Use a wrench or pliers to remove the blade nuts
and remove the blade bolt.