3
•
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden
-
tally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
•
Do not use a battery pack or tool that is dam
-
aged or modified.
Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or tem
-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions.
Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
PRESS TOOL
• Use tool only as directed. Only trained personnel
should operate tool.
• Do not use tool without press jaw installed.
Fingers could be crushed.
• Keep hands away from press jaw while tool is
in use.
Fingers could be crushed.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
•
To reduce the risk of injury, wear safety goggles
or glasses with side shields. Inspect and discard
workpieces with cracks or wear before use.
Materials may crack or shatter.
• Use tool only with MILWAUKEE or MILWAUKEE
approved press jaws, press fittings, and pipe for
which they are designed.
Other uses may cause
injury or damage to the tool, accessories, and pipes.
Leaking may result.
• Only use press jaw with a compression range
rated for this tool.
• Always use common sense and be cautious when
using tools.
It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
W
Watts
MET Laboratories
United States and Canada
Read operator’s manual
Risk of Injury
SPECIFICATIONS
Cat. No. ..................................................... 2922-20
Volts
..............................................................
18 DC
Watts
.................................................................
450
Nominal Force
...........................................
7200 lbs
Compression Range
Copper and Stainless
............
< Ø 4" (100 mm)
PEX
.......................................
< Ø 2" (50 mm)
Black Iron Pipe
......................
< Ø 2" (50 mm)
Battery Type
.................................................
M18™
Charger Type
................................................
M18™
Module/FCC ID .............................BGM11S/Q0Q11
Recommended Ambient
Operating Temperature
....................
14°F to 122°F
FUNCTIONAL DESCRIPTION
1. Start button
2. Green LED
3. Red LED
4. Press jaw
5. Retaining pin
6. Release button
7. Handle
8. Coin battery door
9.
ONE-KEY™ Indicator (Not shown)
2
6
7
1
8
3
5
4
9
