Milwaukee M18 CAG115X, Original Instructions Manual

Page: 17 / 158

15
GB
English
TECHNICAL DATA
Angle Grinder
M18 CAG115X M18 CAG125X M18 CAG115XPD M18 CAG125XPD
Production code 4677 18 02...
... 000001-999999
4677 14 02...
... 000001-999999
4677 02 02...
... 000001-999999
4676 98 02...
... 000001-999999
Volts 18 V 18 V 18 V 18 V
Rated speed 8500 min
-1
8500 min
-1
8500 min
-1
8500 min
-1
D= Grinding disk diameter max.
d= Grinding disk hole diameter 115 mm
22,2 mm
125 mm
22,2 mm
115 mm
22,2 mm
125 mm
22,2 mm
b= Cutting disk thickness min. / max. 1 / 3 mm 1 / 3 mm 1 / 3 mm 1 / 3 mm
b= Grinding disk thickness max. 6 mm 6 mm 6 mm 6 mm
D= Grinding surface diameter max. 115 mm 125 mm 115 mm 125 mm
D= Wiring brush diameter max. 75 mm 75 mm 75 mm 75 mm
Thread of work spindle M 14 M 14 M 14 M 14
Weight without battery 1,8 kg 1,8 kg 1,8 kg 1,8 kg
Weight according EPTA-Procedure 01/2014 (Li-lon 4,0 Ah) 2,5 kg 2,5 kg 2,5 kg 2,5 kg
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
83,7 dB(A)
94,7 dB(A)
83,2 dB(A)
94,2 dB(A)
83,7 dB(A)
94,7 dB(A)
83,2 dB(A)
94,2 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding:
Vibration emission value a
h,SG
Uncertainty K=
3,3 m/s 2
1,5 m/s
2
3,4 m/s 2
1,5 m/s
2
3,3 m/s 2
1,5 m/s
2
3,4 m/s 2
1,5 m/s
2
Disk sanding:
Vibration emission value a
h,DS
Uncertainty K=
1,5 m/s 2
1,5 m/s
2
1,4 m/s 2
1,5 m/s
2
1,5 m/s 2
1,5 m/s
2
1,4 m/s 2
1,5 m/s
2
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.