5001A and 5002A:
Parts Breakdown and Operating Manual
rev. 3/13/17
Operating Instructions • Warning Information • Parts Break down
5001A
6" BENCH GRINDER
WITH LAMP
5002A
8" BENCH GRINDER
WITH LAMP
SPECIFICATIONS 5001A
5002A
Size of Grinding Wheel . . . . 6" x 3/4" x 1/2" . . . 8" x 1" x 5/8"
Speed (at 60 HZ) . . . . . . . . . 3400 RPM . . . . . . . . 3400 RPM
Power . . . . . . . . . . . . . . . . . . 1/2 HP . . . . . . . . . . . 3/4 HP
Weight (G .W .) . . . . . . . . . . . 28 LBS . . . . . . . . . . . 33 LBS .
© Copyright 2017, Sunex Tools
®
RPM
RPM
RPM
ALWAYS READ THIS MANUAL BEFORE
OPERATING THIS TOOL
ALWAYS WEAR EYE PROTECTION WHEN
OPERATING THIS TOOL (USERS AND
BYSTANDERS)
ALWAYS WEAR HEARING PROTECTION
WHEN OPERATING THIS TOOL (USERS
AND BYSTANDERS)
ALWAYS WEAR BREATHING APPARATUS
WHEN OPERATING THIS TOOL (USERS
AND BYSTANDERS)
AVOID PROLONGED EXPOSURE
TO VIBRATION
RATED RPM OF ACCESSORY USED MUST
EXCEED THE MAXIMUM TOOL RPM SHOWN
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
WARNING
