Milwaukee M12 TD, User Manual

Page: 10 / 36

10
English 10
TECHNICAL DATA M12 TD
12 V
463 g
-10°C
to
+50 °C
10 %
to
90 %
-25°C
to
+60 °C
102 x 77 pixels
-10°C
to
330 °C
0.1°C per 2n5 °C
3.0 mrad
±5°C / 5% @ 25°
C
0.10 to 0.99
7.5
to
14
μ
m
Battery voltage
Weight according EPTA-Procedure 01/2003 (1.5 Ah)
Operating temperature range
Operating and storage humidity range (non-condensing)
Storage temperature range without battery
Infrared (IR) resolution
Object temperature range
Thermal sensitivity (Noise Equivalent Temperature Difference (NETD)
Spatial resolution (Instantaneous Field of View IFOV)
Accuracy (whichever is greater)
On-board adjustable emissivity (in increments of 0.01)
Spectral range
Thermal Imaging
Field of view (FOV)
Focus method
Minimum distance in focus
Screen refresh 26
.
8° Horizontal x 35
.
4° Vertical
Fixed Focus
91
.
4 cm
8 Hz
Laser
Maximum Power <1m W
Wave Length
Class
Laser Complies with
Battery system
Image storage system
Data communication interface
Display
630-670 nm
II
21CFR 1040.10 & 1040.11
Milwaukee
M
12
SDHC Card 8 GB (32 GB max)
Mini USB
2
.
4
"
Color TFT-LCD
NOTE:
Displayed readings < -10°C and > 330°C are not specified. The LED floodlight does not affect thermal images.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS THERMAL IMAGER
Do not stare into beam. Do not point laser light at other persons.
Do not view directly into beam with optical instruments (binocular,
telescope).
Do not point laser at reflective surfaces.
Avoid exposure to laser radiation. Laser may emit hazardous
radiation.
Avoid dangerous environments. Do not use in rain, snow, damp or
wet locations. Do not use in the presence of explosive
atmospheres (gaseous fumes, dust or f
l
ammable materials) because
sparks may be generated when inserting or removing battery pack,
possibly causing fire.
SAFETY INSTRUCTIONS BATTERY
Do not try to replace the battery pack if the surface of the instrument
is wet.
Disconnect all the cords and cables from the object under test and
power off the instrument before removing or inserting the battery pack.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors offer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only System
M
12 chargers for charging System
M
12 battery
packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
This appliance is not intended to be used or cleaned
by persons with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless
they have been given instructions concerning the safe
use of the appliance by a person legally responsible
for their safety. They should be supervised whilst
using the appliance. Children shall not use, clean or
play with this appliance, which when not in use should
be secured out of their reach.