background image

Page 3

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

READ AND SAVE ALL INSTRUCTIONS FOR

FUTURE  REFERENCE.

FUNCTIONAL DESCRIPTION

1. Vents
2. Battery  pack  port
3. Electrical  contacts
4. Red charging light
5. Amber waiting light

1.

CAUTION! 

To  reduce  the  risk  of  injury,  charge  only

MILWAUKEE

 7.2, 9.6, and 12 Volt Battery packs in this charger. Other

types of batteries may explode, causing personal injury or damage.

2.

AVOID DANGEROUS ENVIRONMENTS.

 Do not use charger in rain,

snow, damp or wet locations. Do not use battery pack or charger in

the  presence  of  explosive  atmospheres  (gaseous  fumes,  dust  or

flammable materials) because sparks may be generated when insert-

ing or removing battery pack, possibly causing fire.

3.

CHARGE IN A WELL VENTILATED AREA.

 Do not block charger vents.

Keep them clear to allow proper ventilation. Do not allow smoking or

open  flames  near  a  charging  battery  pack.  Vented  gases  may  ex-

plode.

4.

MAINTAIN  CHARGER  CORD.

  When  unplugging  charger,  pull  plug

rather than cord to reduce the risk of damage to the electrical plug and

cord.  Never  carry  charger  by  its  cord.  Keep  cord  from  heat,  oil  and

sharp edges. Make sure cord will not be stepped on, tripped over or

subjected  to  damage  or  stress.  Do  not  use  charger  with  damaged

cord or plug. Have a damaged cord replaced immediately with identi-

cal  replacement  parts  (see  “Maintenance”).

5.

DO NOT USE CHARGER OR BATTERY PACK IF

 it has received a

sharp  blow,  been  dropped  or  damaged  in  any  way.  Do  not  disas-

semble. Incorrect reassembly may result in the risk of electric shock,

fire  or  exposure  to  battery  fluids.  If  it  is  damaged,  take  it  to  a

MILWAUKEE

  service  facility.

6.

CHARGER IS RATED FOR 120 VOLT AC ONLY. 

Charger must be

plugged into an appropriate receptacle.

7.

USE ONLY RECOMMENDED ATTACHMENTS. 

Use of an attachment

not  recommended  or  sold  by  the  battery  charger  manufacturer  may

result in a risk of fire, electric shock or personal injury.

8.

DO NOT USE AN EXTENSION CORD UNLESS IT IS ABSOLUTELY

NECESSARY. 

Using the wrong, damaged or improperly wired exten-

sion  cord  could  result  in  the  risk  of  fire  and  electrical  shock.  If  an

extension cord must be used, plug the charger into a properly wired

This manual contains important safety and operating instructions for battery chargers. Before using the battery charger, read this manual as well as any

labels on the charger, battery pack and tool.

16 gauge or larger extension cord with pins that are the same num-

ber, size and shape as the pins on the charger. Make sure that the

extension cord is in good electrical condition.

9.

DO NOT CHARGE BATTERY PACK WHEN TEMPERATURE

 is below

40°F (5°C) or above 105°F (40°C). Charging while in direct sunlight or

near  a  heat  source  will  not  produce  a  full  charge  and  may  perma-

nently damage the battery pack.

10.

DO NOT BURN, MUTILATE OR DISASSEMBLE BATTERY PACK.

 The

battery  pack  can  explode  in  a  fire.  Mutilation  may  expose  battery

fluids,  causing  burns.

11.

BATTERY FLUIDS CAUSE SERIOUS CHEMICAL BURNS.

 Never al-

low contact with skin or eyes. If a damaged battery pack leaks bat-

tery fluids, use rubber or neoprene gloves to dispose of it. If skin is

exposed  to  battery  fluids,  wash  with  soap  and  water  and  rinse  with

vinegar.  Remove  and  dispose  of  contaminated  clothing.  If  eyes  are

affected, immediately flush with water for 15 minutes and seek medi-

cal attention.

12.

DO NOT SHORT CIRCUIT.

 A battery pack will short circuit if a metal

object  makes  a  connection  between  the  positive  and  negative  con-

tacts on the battery pack. Do not place a battery pack near anything

that may cause a short circuit, such as coins or keys in your pocket.

A short circuited battery pack may cause fire and personal injury.

13.

UNPLUG CHARGER

 when not in use.

14.

TO REDUCE THE RISK OF ELECTRIC SHOCK

, always unplug charger

before  cleaning  or  maintenance,  turning  off  controls  will  not  reduce

this risk. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

15.

STORE YOUR BATTERY PACK AND CHARGER

 in a cool, dry place.

Do  not  store  battery  pack  where  temperatures  may  exceed  120°F

(50°C) such as in a vehicle or metal building during the summer. Charger

will charge

 

the battery at the most rapid rate when the temperature is

between 41°F (5°C) and 113°F (45°C). When the battery temperature

is outside that range, charging will take longer.

3

4

2

5

1

Summary of Contents for 48-59-0192













Reviews: