background image

10

11

 WARNING

To reduce the risk of injury, always 
unplug the charger and remove 
the battery pack from the charger 
before performing any maintenance. 
Never disassemble the battery pack 
or charger. Contact a MILWAUKEE 
service facility for ALL repairs.

To reduce the risk of injury and 
damage, never immerse your battery 
pack or charger in liquid or allow a 
liquid to fl ow inside them.

service facility.

Charging a Hot or Cold Battery Pack

The Red Flashing Indicator light on the 
charger indicates that the battery pack 
temperature is outside the charging range. 
Once the pack is within the acceptable range, 
normal charging will take place and the red 

Battery Pack 
Temperature

150°F or more
32°F to 150°F
14°F to 32°F
14°F or less

Red Charger 
Indicator Light

Flashing
Continuous
Continuous
Flashing

Charging Status

Not charging
Normal charging
Warm-up charging
Not charging

Li-Ion Charging Status

Battery Pack 
Temperature

140°F or more
32°F to 140°F
32°F or less

Red Charger 
Indicator Light

Flashing
Continuous
Flashing

Charging Status

Not charging
Normal charging
Not charging

NiCd Charging Status

Cleaning

Clean out dust and debris from charger vents 
and electrical contacts by blowing with com-
pressed air. Use only mild soap and a damp 
cloth to clean the battery pack and charger, 
keeping away from all electrical contacts. 
Certain cleaning agents and solvents are 
harmful to plastics and other insulated parts. 
Some of these include gasoline, turpentine, 
lacquer thinner, paint thinner, chlorinated 
cleaning solvents, ammonia and household 
detergents containing ammonia. Never use 
fl ammable or combustible solvents around 
battery packs, charger, or tools. 

Repairs

The 

MILWAUKEE

 Li-Ion/NiCd charger has 

no internal serviceable parts. For cordset 
repairs, return the charger to the nearest 
authorized service center. 

light will be continuous. Hot or cold battery 
packs may take longer to charge.

Powering the Charger with an Inverter 
or Generator

The charger will operate with most gen-
erators and inverters rated at 300 Watts 
or higher.

Maintenance and Storage

Store your charger in a cool, dry place. 

As a general practice, it is best to unplug 
battery chargers and remove battery packs 
when not in use. No battery pack damage 
will occur, however, if the charger and battery 
pack are left plugged in.

FIVE YEAR TOOL  LIMITED WARRANTY

Every 

MILWAUKEE

 electric power tool (including battery charger) is warranted to the original 

purchaser only to be free from defects in material and workmanship.  Subject to certain excep-
tions, 

MILWAUKEE

 will repair or replace any part on a electric power tool which, after examina-

tion, is determined by 

MILWAUKEE

 to be defective in material or workmanship for a period of 

fi ve (5) years* after the date of purchase.  Return the electric power tool and a copy of proof 
of purchase to a 

MILWAUKEE

 factory Service/Sales Support Branch location or 

MILWAUKEE 

Authorized Service Station, freight prepaid and insured, are requested for this warranty to be 
effective.  This warranty does not apply to damage that 

MILWAUKEE

 determines to be from 

repairs made or attempted by anyone other than 

MILWAUKEE

 authorized personnel, misuse, 

alterations, abuse, normal wear and tear, lack of maintenance, or accidents.

* The warranty period for Hoists (lever, hand chain, & electric chain hoists), Ni-Cd battery 
packs, Work Lights (cordless fl ashlights), Job Site Radios, and Trade Titans™ Industrial Work 
Carts is one (1) year from the date of purchase.

*There is a separate warranty for Li-Ion Battery Packs that accompany the power tools:

*Every 

MILWAUKEE

 Li-Ion Battery Pack is covered by an initial 1000 Charges/2 Years free 

replacement warranty.  This means that for the earlier of the fi rst 1000 charges or two (2) years 
from the date of purchase/fi rst charge, a replacement battery will be provided to the customer 
for any defective battery free of charge.  Thereafter, customers will also receive an additional 
warranty on a pro rata basis up to the earlier of the fi rst 2000 charges or fi ve (5) Years from 
the date of purchase/fi rst charge.  This means that every customer gets an additional 1000 
charges or three (3) years of pro rata warranty on the Li-Ion Battery Pack depending upon 
the amount of use.  During this additional warranty period, the customer pays for only the 
useable service received over and above the fi rst 1000 Charges/2 years, based on the date 
of fi rst charge and number of charges found on the battery pack via 

MILWAUKEE

’s Service 

Reader.  After 1000 charges/2 years from the date of purchase/fi rst charge, the customer will 
be charged a prorated amount for the service rendered.

Warranty Registration is not necessary to obtain the applicable warranty on a 

MILWAUKEE

 

product.  However, proof of purchase in the form of a sales receipt or other information deemed 
suffi cient by 

MILWAUKEE

, is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF 
EVERY 

MILWAUKEE

 PRODUCT.  IF YOU DO NOT AGREE TO THIS CONDITION, YOU 

SHOULD NOT PURCHASE THE PRODUCT.  IN NO EVENT SHALL 

MILWAUKEE

 BE LI-

ABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, 
OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED 
TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY 
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.  
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CON-
DITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED.  WITHOUT LIMITING THE 
GENERALITY OF THE FOREGOING, 

MILWAUKEE

 DISCLAIMS ANY IMPLIED WARRANTY 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL 
OTHER WARRANTIES.

This warranty applies to product sold in the U.S.A., Canada and Mexico only.

Please consult 

MILWAUKEE

’s website www.milwaukeetool.com or call 1.800.SAWDUST 

(1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service 
on a 

MILWAUKEE

 electric power tool.

Summary of Contents for 48-11-1830


















Reviews: