3
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac
-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
•
Do not use a battery pack or tool that is dam
-
aged or modified.
Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or tem
-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
CABLE CUTTER
• Keep hands away from all cutting edges and
moving parts.
Laceration and amputation can occur.
• To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool.
Material may crack or shatter.
•
WARNING
To reduce the risk of arc flash,
electric shock and property
damage, work on deenergized lines when
possible. Tool is not insulated. Should work
on energized lines be required, ensure all proper
precautions, including those contained in NFPA
70E, have been taken first.
• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
• For best results, use only with energy absorbing
lanyards. Ropes, straps or chains may break and
cause failure. Do not use with lanyards at full ten-
sion.
• Always use common sense and be cautious when
using tools.
It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals
are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
C
US
UL Listing for Canada and U.S.
WARNING
To reduce the risk of arc
flash, electric shock and
property damage, work on deenergized
lines when possible. Tool is not insu
-
lated. Should work on energized lines
be required, ensure all proper precau-
tions, including those contained in NFPA
70E, have been taken first.
WARNING
Ke e p h an ds away
from all cutting edges
and moving parts. Laceration and
amputation can occur.
To reduce the risk of injury, wear safety
goggles or glasses with side shields
when operating or servicing the tool.
Read operator's manual.
FUNCTIONAL DESCRIPTION
12
1.
Blade retainer
2.
Blades
3.
Front handle
4.
Grounding lug
5.
Trigger lock
6.
LED
7.
Trigger
8.
Release trigger
9.
Handle
10.
ONE-KEY battery
door
11.
Remote cut light
2
3
1
12.
Remote cut switch
13.
Hanger
14.
Remote power switch 1
15.
Remote button 2
16.
Remote button 3
17.
Remote cut indicators
13
14
15
16
17
11
5
6 7
8 9 10
4
