Milnor 72044 WP2, Service, Page: 7 / 202

MHPHYDROAE/9541AV (1 of 1)
È ABOUT THIS MANUAL
Ë Scope
—This instruction manual is intended to provide preventive maintenance, service procedures, and
mechanical parts identification for your machine. See the safety manual for safety instructions before installing,
servicing, or operating this machine. See the installation guide for facility requirements, installation instructions,
and assembly instructions. See the operator guide for operator instructions. See the reference manual for program-
ming, operating, and troubleshooting instructions. See the schematic manual for electrical parts identification and
electrical troubleshooting.
Ë Manual Number/Date Code (When To Discard or Save)
—The manual number/date code is lo-
cated on the inside front cover, upper right corner just above the manual name. Whenever the manual is reprinted
with new information, part of this number changes. If the date code after the “/” changes, the new version applies
to all machines covered by the old version, but is improved— thus the old version can be discarded. If the
manual number before the “/” changes, the new manual covers only new machines. Example: Discard MAT-
MODELAE/8739
C
V when MATMODELAE/8739
D
V is received (minor improvements). Also, discard MAT-
MODELAE/87
39D
V when MATMODELAE/87
46A
V is re ce ived (major improve ments ). Bu t k eep
MATMODEL
A
E/8746FV when MATMODEL
B
E/8815AV is received, since the new manual no longer applies to
machines originally shipped with the old manual.
Ë Documents and Change Bars
—The individual documents comprising this manual use the same revision
criteria as the manual. Text documents also display change bars. Example: When section MSOP0599AE/9135
B
V
becomes MSOP0599AE/9135
C
V, change bars with the letter “C” appear next to all changes for this revision. For
a major rewrite (e.g., MSOP0599AE/92
26A
V), all change bars are deleted.
Ë Trademarks of Pellerin Milnor Corporation
—The following, some of which may be used in this pub-
lication, are trademarks of Pellerin Milnor Corporation:
Ampsaver
®
Autolint
®
Auto-Purge
®
Autovac
CBW
®
Dye-Extractor
®
Dyextractor
®
E-P Plus
®
Gear Guardian
®
Hands-Off
®
Hydro-Cushion
®
Mildata
®
Milnet
®
Milnor
®
Miltrac
Miltron
Staph-Guard
®
System 4
®
System 7
®
Totaltrol
®
Ë For Assistance
—Please call:
Pellerin Milnor Corporation
Attn: Service Department
P. O. Box 400
Kenner, LA 70063-0400 Phone: (504) 467-9591
Fax: (504) 467-9777