manualshive.com logo in svg

Milnor 72044 WP2, Service, Page: 191 / 202

Share
Download
Milnor 72044 WP2 Service Download Page 191

MSSM0130AE/9313AV 

È

SERVICING AIR CYLINDERS

This is the general procedure for rebuilding an air cylinder using a Milnor

®

 furnished repair kit, once the air

cylinder has been removed from the machine. See the specific air cylinder and major assembly parts drawing(s) for
component identification and removal/replacement information.

Maintenance procedures require:

•

Two threaded rods and nuts, twice the length of the tie bolts.

•

The appropriate repair kit.

EXPLOSION HAZARD—Spring tension can cause air cylinder to burst apart
with great force during dissassembly. You can be struck by air cylinder parts.

☞

Follow maintenance instructions carefully.

☞

Wear eye protection.

NOTE: Use a new locknut when re-assembling air cylinder (see the appropriate parts drawing).

1. Replace two diagonally opposite tie bolts with threaded rods and nuts as shown in FIGURE 1.

2. Tighten nuts on the threaded rods until they contact the air cylinder.

3. Remove the other two tie bolts and the nuts, washers, clips, and actuators from the external end of piston stem.

4. Loosen nuts on threaded rods evenly, permitting cylinder heads to separate. Use only a few turns on one nut

before moving to the other one. Continue until springs have no tension.

5. Note position and orientation of piston cup(s), washers, and springs. Replace worn parts, then reassemble in

reverse order. Tighten locknut until it is just barely possible to turn the piston cup and washer assembly on
the stem. Correct piston cup shape is shown in FIGURE 2. DO NOT overtighten, as this causes the piston
cup to deform to the shape shown in FIGURE 3 and may cause piston to bind in cylinder.

Tie bolt

Threaded rod

Piston
stem

Î

FIGURE 1

 (MSSM0130AE)

Î

Using Threaded Rods 

Î

FIGURE 2

 (MSSM0130AE)

Î

Correct Piston Cup Shape 

Î

FIGURE 3

 (MSSM0130AE)

Î

Distorted Piston Cup Shape

Summary of Contents for 72044 WP2











































































































































































































Reviews:

No comments