Page 12
Milltronics Weight Lifter MWL – Instruction Manual
7ML19981CR01
• Gently turn the crank handle until the lifting pads are fully raised: you may need
to guide the notches in the base-bar weight onto the round guide-pin initially.
• Ensure there is 10mm (0.38") minimum clearance between the underside of the
base-bar weight and the top surface of the calibration-weight support when the
lifting pads are fully raised. If necessary, shim the MWL to achieve this
clearance.
Round guide pin engages the notch
on the end of the base-bar weight
Underside of base-bar weight
10mm (0.38")
minimum clearance
Lifting pad raised
Top surface of calibration-
weight support
MWL48all.fm Page 12 Tuesday, June 12, 2001 8:23 AM
