7ML19981CR01
Milltronics Weight Lifter MWL – Instruction Manual
Page 7
2. Mount left-handed and right-handed crank body
• Refer to the shim thickness tables on page 15 to determine whether you need to
shim the MWL. Shimming is not always required: it is more likely to be required
with the MUS scale, and less likely with the other models.
• If necessary, select and position the appropriate size shim(s).
• Loosely mount each crank body to the conveyor stringers using 12mm (1/2")
bolts, nuts, and washers.
Locking ball-
pin tethered
to crank body
Input shaft
Crank body
Shim (if required)
Bolt
Right-hand (counter-clockwise rotating) Crank Body Shown
Nut
Washer
Note:
The crank bodies must be left loose to allow for the torque shaft installation.
MWL48all.fm Page 7 Tuesday, June 12, 2001 8:23 AM
