OM-244 997 Page 22
D. Center Subframe And End Subframes
1
Tapped Holes For Center
Subframe And End
Subframes
2
Center Subframe
3
End Subframes
Place center and end subframes on
table top as shown. Fasten one
subframe at a time to ease
installation. Table top hardware will
be used at this point.
3/16 in. Thick Top
Use eight bolts DD and eight
washers WW. Install bolts into table
top ends.
Use eight bolts CC and eight
washers WW. Install bolts into
slotted holes for the center and end
subframes and rails.
3/8 in. Thick Top
Use eight bolts CC and eight
washers WW. Install bolts into table
top ends.
Use eight bolts AA and eight
washers WW. Install bolts into
slotted holes for the center and end
subframes and rails.
Tighten all bolts at this point.
2
Tools Needed:
3
hex bit 3/16 in.
1
1
1
1
1
1
DD or CC
and WW
CC or AA
and WW
3
3/16 in. thick top uses CC and WW
3/8 in. thick top uses AA and WW
3/16 in. thick top uses DD and WW
3/8 in. thick top uses CC and WW
Bottom View
