MikroKopter ARF OktoXL, Instruction Manual

Page: 56 / 59

Troubleshooting
Error: Source:
Motors do not start.
•
Compass is not calibrated.
•
The motor safety switch hasn't been pressed at the same time
with „Gas-Stick“ down + „Yaw-Stick“ to the right.
•
Battery is not connected.
•
Transmitter is not switched ON.
•
Wrong model memory on the transmitter has been chosen.
Motors can be started , but Kopter takes
no (not right) gas.
•
Height sensor not switched OFF during start.
•
In the settings was clicked „ Avoid Start without GPS Fix " and
there is no Satfix.
•
Battery is not charged.
The Kopter beeps with switched ON
motors in second intervals.
•
There is no Satfix and the GPS-Mode switches on the transmitter
are on „PositionHold“ or „ComingHome“.
The Kopter beeps with switched OFF
motors in intervals.
•
The battery is empty and need to be charged.
•
The transmitter has been switched OFF.
The transmitter beeps in intervals.
•
The Kopter is not connected with the battery.
•
The battery from the transmitter need to be charged.
•
The Kopter is sluggish to control
during a flight.
•
Carrying a large payload on the Kopter.
Page 52 HiSystems GmbH