MikroKopter ARF OktoXL, Instruction Manual

Page: 18 / 59

Connecting the receiver
One 3-line PPM cable and one1-wire data cable (for telemetry transmission) are used to connect the receiver.
(Those both cables come out on the back and the bottom side of the Kopter.)
Here, e.g. a Graupner GR-12/GR-16/GR-24, Jeti-RMK2 or a similar receiver with PPM sum signal can be connected
directly. The data cable for the telemetry transmission is plugged into the appropriate port of the receiver (if present).
A telemetry transmission of the Kopter to the transmitter is possible with the Graupner HoTT-System.
No other sensors are required.
An appropriate mount for the GR-16 receiver is applied to the ARF-MikroKopter . This will be hooked up with the receiver
to the back side of the battery holder.
You need to connect:
•
the three-wire PPM-Connection PPM-Sum-signal
•
the telemetry-cable to the telemetry input of the receiver (if available)
Example installation with receiver GR-16:
In case that a different transmitter and receiver are used, the receiver must be bound to the transmitter and
set to the required sum-signal. Please refer to the manual of the transmitter how to activate the sum-signal
Page 14 HiSystems GmbH
info
info
info
info