manualshive.com logo in svg

MikroKopter ARF OktoXL, Instruction Manual

The MikroKopter ARF OktoXL offers a high-quality, ready-to-fly experience with its advanced design and stability. For complete setup and operation guidance, simply download the free Instruction Manual from manualshive.com. This comprehensive manual provides step-by-step instructions, ensuring a hassle-free flying experience with your MikroKopter ARF OktoXL.

Share
Download
background image

Overall View

1 – Protective hood
2 – Motor MK3638 with 12“ propeller
3 – Rigger
4 – Landing gear „HiLander-26“
5 – Battery holder with LiPo
6 – Camera mount SLR2 (optional)
7 – Additional camera (optional)
8 – Video transmitter (optional)

  9 – Protective hood
10 – MKGPS
11 – GPS-Shield (improves the GPS-receiving signal)
12 – NaviCtrl
13 – FlightCtrl
14 – Motor controller (BL-Ctrl)

Page 8                                                                                                                                   HiSystems GmbH

Summary of Contents for ARF OktoXL




























































Reviews:

No comments

Related manuals for ARF OktoXL

Air Hogs ALTITUDE VIDEO DRONE Manual preview
ALTITUDE VIDEO DRONE
Brand: Air Hogs Pages: 8
Reely TQ Performance Drone RtF Operating Instructions Manual preview
TQ Performance Drone RtF
Brand: Reely Pages: 32
Heliceo Fox6 User Manual preview
Fox6
Brand: Heliceo Pages: 73
Kogan KACAMDRONEA User Manual preview
KACAMDRONEA
Brand: Kogan Pages: 8
dji PHANTOM 3 PROFESSIONAL User Manual preview
PHANTOM 3 PROFESSIONAL
Brand: dji Pages: 58
Idea-fly apollo A1 Operator'S Manual preview
apollo A1
Brand: Idea-fly Pages: 27
Feima Robotics J.ME Quick Start Manual preview
J.ME
Brand: Feima Robotics Pages: 27
le-idea IDEA 37 Quick Start Manual preview
IDEA 37
Brand: le-idea Pages: 4

Brands by name

Popular brands

Load more brands