background image

1

2

3

4

POWERING UP AND PAIRING 

(WITH ALTITUDE ON)

TOGGLE INTO MANUAL FLIGHT WHILE IN AUTO-HOVER

• Hold stunt button and press auto land/auto launch button 

and a tone will sound from the remote. Make sure your 
throttle stick is in the down position.

• After the tone is heard, move the throttle stick up until 

the drone starts to rise. (If throttle is not matched in 
5 seconds then manual flight will be cancelled.)

TOGGLE INTO AUTO HOVER WHILE IN MANUAL FLIGHT

• Press either the up or down altitude locking button to

toggle back into auto hover. (Your drone will hover at the
current throttle speed.)

TOGGLE INTO MANUAL FLIGHT BEFORE TAKE-OFF

• Hold stunt button and press auto land/auto launch button 

and a tone will sound from the remote. Make sure your 
throttle stick is in the down position. 

• Push the throttle stick up to  begin manual flight.

When launching the drone, face the same

direction as the drone. Green blades and green

LEDs should be in front.

If your drone drifts in any direction when you are

hovering, you will need to make Trim

adjustments to correct the driving. Trim

adjustments are sometimes needed when the

drone is first flown after purchase.  See TRIM

ADJUSTMENTS section for details.

Practice launching, hovering and landing before

attempting to learn other moves.

Flying 2 to 3 feet above the ground will reduce

ground turbulence and make flying easier.

When first attempting to fly in different

directions, start by tapping the direction stick

until you have a feel for it. Always move controls

slowly until you become comfortable operating

the drone.

Once you’ve mastered flying in directions,

practice rotational controls. Spinning and

keeping drone facing the same direction as you

makes flying easier and more intuitive.

Stay 2 to 3 feet away from walls and ceilings

as drone will be drawn towards them if you fly

too close.

If propeller blades come in contact with

another object or you crash, throttle down or

auto land immediately to prevent possible or

further damage.

If anything prevents drone’s blades from

spinning or they become jammed, throttle

down or auto land immediately. Do not attempt

to fly until obstruction has been removed and

damage fixed.

Should something prevent drone’s blades from

spinning, drone may auto shutdown. LiPo

battery will need to be unplugged then

reconnected to restore flying power.

If the drone flies too far away, beyond the

control range of the remote, the drone will

auto-land to prevent the drone from flying away

out of control.

 FLYING GUIDE

STREAMING VIDEO DRONE

Press 

Auto Launch

 to launch a few feet off the ground.

Use the directional 

Thumbstick

 to fly in any direction. 

Press the 

Altitude

 button to fly approximately 12” higher or lower.

Press the 

Auto Land

 button to land. 

Connect battery wires on bottom of drone.

Place drone on flat surface.

Turn on remote.

Wait for flashing green light to turn solid.

Online Video 

Instructions & Flying 

Tips available now at 

SKYVIPER.COM

FLIGHT CONTROLS

FLYING BASICS

FLYING TIPS

DIRECTION STICK

• Push the direction stick forward to fly forward or

away from you (Green blade in front). Push
backwards to fly backward. The further you push,
the faster the drone will fly in that direction.

• Push the direction stick left to fly left. Push right 

to fly right. The further you push, the faster 
the drone will fly sideways.

ALTITUDE BUTTONS

•  Press the up or down arrow to adjust 

the drone’s altitude. The drone will lift 
or lower approximately 12” each time 
the up or down arrow is pressed.
(Distance may vary.)

•  Hold the up or down buttons for 

continuous lift or descent.

AUTO LAUNCH/LAND BUTTON

•  Press the auto launch 

button to launch a few feet 
from the ground. 
(Exact height may vary.)

•  Press the auto land button 

to land the drone by itself.

1 2 3

LOW

MED

1 2 3

HIGH

1 2 3

FLIGHT SENSITIVITY SWITCH

The Drone’s responsiveness may be adjusted on the controller to match your flying skills. 
There are three options: 1 LOW sensitivity     2 MEDIUM sensitivity     3 HIGH sensitivity
It is best to start in the low sensitivity position until you have mastered flying. Flight sensitivity 
can be adjusted before or during flight.

Forward/

Backward Trim

Power On/
Off Switch

Power Indicator LED

Video and photo
Recording buttons

Rotation Trim

Left/Right Trim

Stunt Button

THROTTLE/
ROTATION STICK

Press up to
fly forward

Press down 
to fly 
backward

Press left
to fly left

Press right 
to fly right

DIRECTION STICK

Press up
to lift

Press down
to descend

Press left 
to rotate 
counter-
clockwise

Press right  
to rotate 
clockwise

01601

THROTTLE/ROTATION STICK

•  While in manual flight mode push the throttle 

stick forward to make drone lift.

•  The further you push the throttle stick, the 

faster you lift.

  Up and down controls only apply to manual

 

flight mode. 

(

(

01601

Summary of Contents for 01601

Page 1: ...iPo battery will need to be unplugged then reconnected to restore flying power If the drone flies too far away beyond the control range of the remote the drone will auto land to prevent the drone from flying away out of control FLYING GUIDE STREAMING VIDEO DRONE Press Auto Launch to launch a few feet off the ground Use the directional Thumbstick to fly in any direction Press the Altitude button to...

Page 2: ...STREAMING AND RECORDING RECORDING TO MICRO SD CARD SOLD SEPARATELY Before each use an adult should check this product and the LiPo battery to ensure no damage or hazards exist Drone has rotating blades that move at high speed posing danger of damage and injury Pilots are responsible for any actions that result in damage or injury from the improper operation of drone Adequate flying space is requir...

Page 3: ...educing performance Unplug the Drone and remove fibers from motors Remove blades if necessary 3 Insert LiPo battery into back of drone Reconnect the battery wires 2 Plug charging cord into computer or USB power block Once charged disconnect battery from USB charging cable OPTIONAL BLADE GUARDS Blade guards are great for beginning pilots and can be easily installed if desired The guards add undesir...

Page 4: ...nd or registered trademarks of Skyrocket Toys LLC All other trademarks logos and copyrights are the property of their respective owners and there is no relationship express or implied with Skyrocket Toys LLC MADE IN CHINA Remove all packaging attachments before giving the toy to a child Not suitable for children under 3 years due to small parts that could be swallowed Conforms to product safety st...

Reviews: