12
Notification
Solutions
LID WARNING lamp blinking Ensure that the Lid is closed completely and in
the LOCKED position, aligning
with
Display “E1”
The Pressure-Cooker will stop the cooking cycle.
Unplug Pressure-Cooker and contact customer
service center.
Display “E2”
The Pressure-Cooker will stop the cooking cycle.
Unplug Pressure-Cooker and contact customer
service center.
Display “E3”
If you receive this code while using one
of the pressure cooking settings, then
the lid probably did not close or seal
correctly. To resolve, follow the steps
below:
1. Rotate the Steam Release Valve to
the “Release” position and wait for the
unit to de-pressurize.
2. Take off the lid and look underneath
to make sure the Sealing Gasket )large
rubber ring) is properly secured to the
underside of the lid.
3. If your recipe looks like it may need
more liquid now that you have released
some of the steam after removing the lid,
then add more, stir your ingredients, and
reattach the lid, making sure the Steam
Release Valve is in the “Seal” position.
4. Unplug the unit for at least 5
seconds, and then re-plug it in and re-
program your cook settings to begin
cooking.
Summary of Contents for GPC 106
