MIGEL GPC 106, User Manual

Page: 22 / 30

1. Connect unit to power supply, Beep sound is heard. Display panel
shown - - - - )standby mode)
2. Scroll the function knob to select function, related function lamp will
flash. Also will display the pressure setting )or temperature setting), and
default cook time.
3. Tap touch the adjust key to set cook time, pressure )or temperature).
4. Tap touch delay timer if need to use Delay Timer, delay timer lamp flash,
and tap touch time adjust key to set the timer. If you want to escape the
delay timer setting now, tap touch the delay timer key again. Then unit will
go back to step 3.
Note: some function can not use delay timer, see table above.
5. Tap touch Start key for 1 second to start the unit.
)1) if delay timer is used, delay timer lamp light ON in solid, function lamp
keep flash, timer count down. When timer is count to 0, unit start working,
delay timer lamp light off, function lamp light ON in solid.
)2) If no delay timer is used, function lamp light ON in solid, unit start
cooking.
6. While unit is working, to stop it, tap touch the Keep warm/ Cancel key
for 1 second, unit stop and come back to standby mode.
For Pressure Cooking
1. Holding the lid handle tightly, turn to OPEN position and lift it up.
2. Put the food and water into the pot. Note: The volume of food cannot
exceed 2/3 height of the inner pot; Food the easy to intumescent )such as:
bean) cannot exceed 1/5 height of inner pot. Do not wash food in the inner
pot, prevent destroying the inner pot.
Note: Never heat an empty pot. Do not cook too less food beyond the min
level. If too less food inside, the pressure will rise too fast during cooking,
the pressure may comes beyond the normal setting cause steam escape
from the Steam release valve )pressure limiting valve).
3. Always clean the bottom of inner pot and heating plate before put the
inner pot into the middle pot. Make sure there is no foreign matter inside.
4. Cover the lid on OPEN position and then turn it to LOCK position.
Panel Operation
6