MIGEL GPC 106, User Manual

Page: 27 / 30

11
Cleaning and maintenance
Caution: Unplugged the appliance and let it cool down entirely before cleaning.
Do not immerse the unit into liquid.
Never use diluent or benzene. Chemical wiping cloth, plastic brush, metal brush,
detergent not for tablewares, whitener for cleaning.
1. Take out and clean the inner pot and the lid, wash in water after the use of the
pressure cooker, the mop them with dry soft cloth.
2. Clean the SST lid inner surface, gasket, anti-block cover, bobber valve and
Steam Release Valve, as shown below.
Cleaning of gasket:
)1) if the gasket is not dirty obviously, suggest to wash in water with the SST lid.
)2) If the gasket is dirty obviously, pull it out from the gasket fixing ring gently,
wash and clean it well. Then assembly it into the gasket fixing ring carefully.
Note: Make sure the gasket is assembly correctly before use.
Cleaning of anti-block cover:
Pull out the anti-block cover and press it back after
cleaning.
Cleaning of bobber valve:
Shift the bobber valve core up and down gently,
clean the bobber valve airproof ring with water.
Cleaning of Steam Release Valve/ exhaust pipe: Lift the Steam Release Valve
and clean it with water, check the exhaust pipe is not blocked by food residue,
then put the Steam Release Valve back to the exhaust pipe correctly.
3. Remove the water collector out from unit back side gently. Discard the water
after each use. Clean and then assembly the water collector back to the unit back
side.
4. Wipe the unit body with clean cloth.