Miele WS 5101, Operating Instructions Manual

Page: 20 / 32

Priming the dispensing pumps
Before the liquid dispensing pumps can be
used the liquid detergent must be drawn into
the system and the amount to be dispensed
set. Access the Service-Operation program
to do this.
Drawing in the liquid detergent
^
Insert the suction pipes into the liquid de-
tergent containers.
^
Turn off the washer-extractor.
^
Turn the access selection key to position
B, "Operation" and set the program selec-
tor to 24.
^
Turn on the washer-extractor, and within
4 seconds, press the
T
"Prewash" button
4 times in quick succession. This brings
you into Service-Operation.
SERVICE-OPERATION
>SERVICE PROGRAMMES< MACHINE DATA
After selection press Start button.
~
^
Press
X
"Start".
SERVICE-OPERATION SERVICE PROGS
SERVICE PROGRAMME >1<
After selection press Start button.
~
^
Select SERVICE PROGRAMME 2 with the
4
"Plus" button and press the
X
"Start"
button.
SERVICE-OPERATION SERVICE PROGS
SERVICE PROGRAMME 2
Dispenser valve >D1< Disp. time 0 secs.
After selection press Start button.
^
With the
4
"Plus" button select D1, with the
2
"Cursor" button move to the input field
for dispensing time and with the
4
"Plus"
button set a dispensing time of approx. 20
seconds. Press
X
"Start", and the hoses of
pump 1 will be filled.
SERVICE-OPERATION SERVICE PROGS
SERVICE PROGRAMME 2
Dispenser valve >D1< Disp. time 20 sec.
Cancel with the End button.
^
Cancel with the
7
"End" button.
Repeat the whole process with the other
pumps.
SERVICE - OPERATION
>SERVICE PROGRAMMES< MACHINE DATA
After selection press Start button.
~
^
Press the
X
"Start" button, select the SER-
VICE PROGRAMME 2, and press
X
"Start"
again.
To exit Service-Operation:
^
Press
7
"End" and turn off the machine.
^
Turn on the machine and select Program
8, Separate Rinse and Spin, to flush the
proofing agent out of the machine.
To adjust the amount dispensed by the
pumps
The amount to be dispensed is measured in
liters in the Service Program. The dispensing
time is then set in key access position
C
"Programming".
^
Put the suction pipe into a deep measuring
container with sufficient liquid detergent
and keep it at the full level.
^
Continue as for Drawing in liquid deter-
gent
Liquid dispensing
20