Changing temperaure and spin
speed
The following parameters can be changed
before the start of a program:
– the temperature in 1 °C steps from cold,
15 °C to maximum 95 °C .
– the spin speed in 100 rpm steps.
WS 5101 300 - 1500 rpm
WS 5141 300 - 1000 rpm
PROGRAMME
1
COTTONS
>60 °C<
Prewash
1
95 °C
Main wash
1
Rinses
3
1000 RPM
^
Use the
2
"Cursor" to position the cursor
on the input field for the Prewash tempera-
ture, and set the temperature required
(here 60 °C) with the
3 4
"Minus or Plus".
^
Position the cursor on the input field for the
Main wash temperature, and set the tem-
perature required with
3 4
"Minus or
Plus".
^
Position the cursor on the input field for the
spin speed, and set the spin speed requi-
red with the
3 4
"Minus or Plus".
Adding detergent
^
For the standard programs add detergent
for the main wash into compartment
II
and,
if required into compartment
I
for the
prewash. Fabric softener is put into com-
partment
§
and liquid bleach is put into
the compartment without a symbol.
Detergent use
^
Only use low sudsing detergents. Do not
oversuds the unit with too much detergent.
^
Take into account the water hardness, and
the detergent manufacturer’s instructions
when filling the dispenser.
^
Do not fill fabric softener or bleaching
agent higher than the level marker in the
relevant dispenser compartment.
Otherwise they will be siphoned into the
suds container.
^
Press
X
"Start" to begin washing.
Operation
14
Summary of Contents for WS 5101
Page 29: ...Installation instructions ...
