Miele WKH 120 WPS Operating Instructions Manual Download Page 92

Page: 92 / 104

Settings

You can use the settings menu to alter

the machine's electronics to suit

changing requirements.
Settings can be altered at any time.

Opening the Settings menu

Before you begin, ensure that:

– The washing machine is switched on.
– The standard display is showing.







2:59



1600



Touch the



and



sensors at the

same time.

Language 



You are now in the Settings menu.

Selecting a setting



Touch the





sensor until the

setting you want appears in the dis‐

play.

– The



sensor scrolls down the list.

– The



sensor scrolls up the list.



Touch the

sensor to select the

setting displayed.

Changing a setting



Touching the



sensor will call up the

different options for the setting.

The option which is selected will have

a tick



next to it.



When the option you want shows in

the display touch the

sensor to

activate it.

Exiting a setting



Touch the





sensor repeatedly

until

Back 

appears in the display.



Touch the

sensor.

Tip:

After a while the display will revert

automatically to the standard display.

Summary of Contents for WKH 120 WPS









































































































Search results

Summary of Contents for WKH 120 WPS

Reviews:

Related manuals for WKH 120 WPS

Brands by name

Popular brands

Miele WKH 120 WPS, Operating Instructions Manual

Search results

Summary of Contents for WKH 120 WPS

Reviews:

Related manuals for WKH 120 WPS

Brands by name

Popular brands