Problem solving guide
65
The following fault messages appear in the display and the
programme stops
Problem
Cause and remedy
Water intake See
The water inlet is blocked or restricted.
Check whether the stopcock is opened properly.
Check whether the inlet hose is kinked.
Check whether the water pressure is too low.
The filter in the water inlet is blocked.
Clean the filter.
Drainage See
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filters and the drain pumps.
The maximum delivery head is 1 m.
Service Water-
proof
The water protection system has reacted.
Close the stopcock.
Call the Service Department.
Service Fault F
There is a fault.
Start the programme again.
If the fault message appears again, contact the
Service Department.
To switch off the fault messages: Switch the washing machine off with the
but‐
ton.
