Problem solving guide
67
The following fault messages appear in the display at the end of
the programme
Problem
Cause and remedy
Check dosage
Excessive foam has built up during washing.
Check the amount of detergent dispensed.
With automatic detergent dispensing check the
dosage amount set.
Observe the instructions on the detergent packag‐
ing and the degree of soiling of the laundry.
If necessary, reduce the dosage amount by incre‐
ments of 10%.
Hygiene info
A programme using a temperature above 60°C has
not been run for a long time.
In order to prevent bacteria and unpleasant
odours building up in the machine, run the
Mainte‐
nance wash
programme using Miele machine
cleaner or powder detergent.
Container 1 empty
or
Container 2 empty
or
Cont. 1+2 empty
The TwinDos container (or containers) is empty.
Fill the container or containers with liquid deter‐
gent or fabric conditioner or replace the car‐
tridge(s).
Check if the laundry is clean. There may not have
been enough detergent.
If necessary, wash the items again.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the
OK
sensor.
