Changing the programme sequence
53
Adding or removing laundry af‐
ter the programme has started
Press the
Start/Stop
button.
The following will appear in the display:
Cancel programme
Scroll up the list with the
or
sen‐
sor to:
Add laundry
Touch the
OK
sensor.
If this message does not appear in the
display then it is no longer possible to
add or remove items of laundry.
The programme will stop and the door
will unlock.
Pull open the door.
Add or remove items.
Close the door.
Press the
Start/Stop
button.
The programme will continue.
Please note:
Once a programme has started the
washing machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
The door cannot be opened, if:
– the suds temperature is above
55°C
.
– the water is above a certain level.
– the programme has reached the
Spin
stage.
If you want to open the door when the
above conditions are present you will
need to cancel the programme.
The safety lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate until
the temperature has dropped to below
55°C.
