manualshive.com logo in svg

Miele WKG 120 WCS, Operating Instructions Manual

Share
Download
Miele WKG 120 WCS Operating Instructions Manual Download Page 91

Settings

91

Degree of soiling

You can select the default setting for
the degree of soiling or switch off the
degree of soiling query.

Options

– Default setting

You can choose between the Light,
Normal or Heavy degree of soiling
settings.
Factory default setting: Normal.

– Query

You can switch the degree of soiling
query on or off. 
Factory default setting: On

Buzzer volume

You can select one of seven different
settings for the buzzer volume.

The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.

Keypad tone

Each touch of a sensor or press of a
button is confirmed with an audible
tone.

Factory default setting: the keypad tone
is switched on.

Consumption

In this setting you can check the
saved energy and water consumption
values.

Options

– last programme

Shows the consumption for the last
wash programme carried out.

– Display

Shows the sum of the energy and the
sum of the water used by the
previous programmes.

– Reset function

The energy consumption and water
consumption totals are reset to zero.

Summary of Contents for WKG 120 WCS





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands