manualshive.com logo in svg

Miele WKG 120 WCS, Operating Instructions Manual

Share
Download
Miele WKG 120 WCS Operating Instructions Manual Download Page 53

Detergent

53

Fabric conditioner and liquid
starch at the end of the
programme

You can dispense fabric conditioner
either by using automatic dispensing or
via the detergent dispenser
compartment.

Automatic dispensing

One of the automatic dispensing
containers must be filled with fabric
conditioner.

Touch the 

Dos

 



 sensor.

Activate the appropriate container.

Fabric conditioner will be dispensed in
the last rinse.

Manual dispensing

Add the fabric conditioner or liquid
starch to the 

 compartment or

insert the appropriate capsule. 

Do

not exceed the maximum level
mark.

The agent will be automatically
dispensed in the last rinse. At the end
of the programme a small amount of
water will remain in the 

compartment.

If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.

Summary of Contents for WKG 120 WCS





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands