manualshive.com logo in svg

Miele WKG 120 WCS, Operating Instructions Manual

Share
Download
Miele WKG 120 WCS Operating Instructions Manual Download Page 88

Settings

88

You can use the settings menu to alter
the machine's electronics to suit
changing requirements.

Settings can be altered at any time.

To access Settings

Before you begin, ensure that:

– The washing machine is switched on.

– The standard display is showing.

OK

2:59

1600

Touch the 

 and 

 sensors at the

same time.

Language 

You are now in the Settings menu.

Selecting a setting

Touch the 

 or 

 sensor until the

setting you want appears in the
display.

– The 

 sensor scrolls down the list.

– The 

 sensor scrolls up the list.

Touch the 

OK

 sensor to select the

setting displayed.

Changing a setting

Touching the 

 sensor will call up the

different options for the setting.

The option which is selected will have
a tick 

 next to it.

When the option you want shows in
the display touch the 

OK

 sensor to

activate it.

Exiting a setting

Touch the 

 or 

 sensor repeatedly

until 

Back 

 appears in the display.

Touch the 

OK

 sensor.

Summary of Contents for WKG 120 WCS





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands