manualshive.com logo in svg

Miele WKG 120 WCS, Operating Instructions Manual

Share
Download
Miele WKG 120 WCS Operating Instructions Manual Download Page 29

5. Add detergent

29

There are several options for adding
detergent.

TwinDos

Before using TwinDos for the first time
the display will show information about
the factory default settings for TwinDos.
The following will appear in the display:

UltraPhase 1+2 set for medium water
hardness level. Change in "Settings"/
"TwinDos"

Touch the 

 sensor repeatedly until

until you have read all the rows of
text.

The 

OK

 sensor will light up.

Touch the 

OK

 sensor to confirm.

Miele 2 Phase system

UltraPhase 1 and UltraPhase 2 need to
be dispensed in different ratios
depending on the colour mix of the
laundry load.

Touch the 

Dos



 sensor.

For whites

Use the 

 and 

 sensors to select

the colour mix of the laundry and
confirm with the 

OK

 sensor.

UltraPhase 1 and UltraPhase 2 will be
dispensed accordingly.

Liquid detergent/Fabric conditioner

It is possible to use other types of liquid
detergent/fabric conditioner. Refillable
TwinDos containers (optional
accessories) are required for this.

The washing machine's electronic
settings need to be adjusted
accordingly. See “Settings - TwinDos”.

Touch the 

Dos

 



 sensor.

Both agents

Confirm the option displayed with the

OK

 button or select another

detergent or fabric conditioner with
the 

 and 

 sensors.

Tip: 

The recommended detergent(s) is

shown in the display and marked with a
tick (

).

The appropriate amount of detergent
and/or fabric conditioner for the
programme will now be dispensed.

Adding stain remover

There are two options for adding stain
remover in addition to using the
automatic dispensing system:

– Use the Booster cap

– Add stain remover to the

 compartment.

Summary of Contents for WKG 120 WCS





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands